Jump to content

Adeptus Mechanicus

20 files

  1. Forge World - Agripinaa

    By commission of Vel'cona. First in a series of Adeptus Mechanicus forge world logos. Each PDF has a color logo (Red, Black, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible).

    1373 downloads

       (0 reviews)

    0 comments

    Updated

  2. Ordo Reductor

    Ordo Reductor heraldric device. Features both the full Ordo Reductor logo and a demi-logo (for when the unit is embedded in another force - a second logo can be added in the space provided).
     
    PDF contains layers for stroked (black border) and no stroke versions of the logo, plus Red, Black, Blue, Green, Grey, and Yellow backgrounds. (Make sure the Layers pane is turned on in your viewer to select the logo/background you wish to print.)

    528 downloads

       (0 reviews)

    0 comments

    Submitted

  3. Forgeworld - Voss Prime

    By commission of Vel'cona. Seventh and final in a series of Adeptus Mechanicus Forgeworld logos. Each PDF has a color logo (Red, Black, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible).

    1191 downloads

       (1 review)

    0 comments

    Submitted

  4. Forgeworld - Triplex Phall

    By commission of Vel'cona. Sixth in a series of Adeptus Mechanicus Forgeworld logos. Each PDF has a color logo (Red, Black, Grey, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible).
     
    -=-=-=-=-=-=-=-=-=-=-=-=-
     
    SPECIAL NOTE: To comply with B&C upload file size limits, the Triplex Phall sheet is sized for A6 paper instead of the usual A5. To facilitate printing multiples logo sheets per page, a blank dummy page is included in the file. To print to A5, set Pages to Print to Pages: 1,1. Set Page Sizing & Handling to Multiple, Pages Per Sheet: 2 (or, if printing to A4, set the Pages Per Sheet to 4).
     
    http://image.bolterandchainsword.com/uploads/gallery/album_10579/gallery_80588_10579_125561.jpg

    1994 downloads

       (0 reviews)

    0 comments

    Submitted

  5. Forge World - Stygies VIII

    By commission of Vel'cona. Fifth in a series of Adeptus Mechanicus Forgeworld logos. Each PDF has a color logo (Red, Black, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible).

    1845 downloads

       (1 review)

    0 comments

    Submitted

  6. Forgeworld - Lucius

    By commission of Vel'cona. Fourth in a series of Adeptus Mechanicus Forgeworld logos. Each PDF has a color logo (Red, Black, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible).

    1359 downloads

       (0 reviews)

    1 comment

    Submitted

  7. Forge World - Gryphonne IV

    By commission of Vel'cona. Third in a series of Adeptus Mechanicus Forgeworld logos. Each PDF has a color logo (Red, Black, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible).

    1698 downloads

       (1 review)

    0 comments

    Submitted

  8. Forgeworld - Graia

    By commission of Vel'cona. Second in a series of Adeptus Mechanicus Forgeworld logos. Each PDF has a color logo (Red, Black, Bone White) with layered color backgrounds (Note: if more than one color background is active at a time, only the top most background layer will be visible).

    1160 downloads

       (0 reviews)

    0 comments

    Submitted

  9. Legio Gryphonicus/War Griffons (Knight scale)

    As commissioned by Olis. Legio Gryphonicus/War Griffons markings, Imperial Knight scale. File has four color layers to aid in printing to white decal paper: cyan/light blue, gold, pale brown and black (NOTE: some logos will blend with some background layers).

    960 downloads

       (0 reviews)

    0 comments

    Submitted

  10. Legio Gryphonicus/War Griffons

    Via commission by Olis. Sheet 1 of 4 for the Legio Gryphonicus/War Griffons Titan Legion. Sheet 1 covers the infantry for the War Griffons based on the Codex Titanicus era iconography.

    690 downloads

       (0 reviews)

    0 comments

    Submitted

  11. Knight House Hyperion Decal Sheet

    The old House Hyperion look just isn't doing it, so I thought I'd give it a bit of an update. Included are as many little stripes and crescent moons as I could fit, including a custom aquila, and more, including some reproduced details from other B&C decal sheets.
     
    This is a LARGE file, designed for designed to be printed in FULL colour, on 200x330mm paper. Typically using an ALPS printer, or a laser that supports white content. Printing this on traditional clear decal paper WILL NOT yield a final product close to what you see on your computer screen.
     
    If you don't have access to either of the above printer types, or a special inkjet, If possible, I recommend using a reputable custom decal print shop (I used Bedlam Creations) to have this printed. It may cost some decent cash, but you'll be happier with the result.
     
    The uploaded version is 150dpi which should be fine for most uses. A 600dpi version can be had by emailing PMing me.

    2442 downloads

       (2 reviews)

    0 comments

    Submitted

  12. Legio Tempestor (Storm Lords - Traitors) Logo Sheet BOLS

    Hi Everybody, I have had a fun weekend preparing for the arrival of my 2nd Reaver!!! I've been scouring the net and going waaaaaay back into my early 1990s stuff From Adeptus Titanicus to dig up background on a good looking Traitor Titan Legion (The Legio Tempestor; The Storm Lords).
     
    I created the original logos in Adobe Illustrator.
     
    I would print out two copies on highgloss color printer paper, cuting out two pairs of banners for your titan, then glue them together to make matching double-sided banners.
     
     
     
     
    Next print out a single copy on decal paper for the logos that are embossed directly onto the titan (the princeps rank badge and the titan-model badges for the lower legs.)
     
    The sheet has instructions on where you hang them from your models but there will a bit of creativity involved in getting the top-carapace legion banners strung up. I'm planning on drilling in a nice medal rod bannerpole atop the missile launcher onthe reaver.
     
     
     
    In any case, enjoy and I wish you titan fanatics the best in using this set for your forces. For the Warmaster!!!
     
    -bigred

    773 downloads

       (0 reviews)

    0 comments

    Submitted

  13. Legio Mortis (Death's Head) Traitor Logo Sheet BOLS

    Hi Everybody, I've been going over many of the Titan legions from some of my ancient GW Epic books and picking another good looking scheme for the Traitors. By popular request I settled on the Legio Mortis (The Death Heads), with their menacing black plating and camo carapace colors and with red/gold trim, these guys look mean! These are the bad boys of the Heresy who breached the walls of the Imperial Palace, so rub that in the Loyalists faces...they love it!
     
    I created the original logos in Adobe Illustrator.
     
    I would print out a copy on highgloss color printer paper, cuting out a pair of banners for your titan, then glue them together to make matching double-sided banners
     
    Next print out a single copy on decal paper for the logos that are embossed directly onto the titan (the princeps rank badge and the titan-model badges for the lower legs.)
     
    The sheet has instructions on where you hang them from your models but there will a bit of creativity involved in getting the top-carapace legion banners strung up. I'm planning on drilling in a nice medal rod bannerpole atop the missile launcher onthe reaver.
     
    In any case, enjoy and I wish you titan fanatics the best in using this set for your forces. For the Warmaster!!!
     
    -bigred

    922 downloads

       (0 reviews)

    0 comments

    Submitted

  14. Legio Metalica Logo Sheet BOLS

    Hi Everybody, I have had a busy weekend with my Reaver scouring the net and going waaaaaay back into my early 1990s stuff From Adeptus Titanicus to dig up background on my Titan Legion (The Legio Metalica).
     
    I created the original logos in Adobe Illustrator.
     
    I would print out two copies on highgloss color printer paper, cuting out two pairs of banners for your titan, then glue them together to make matching double-sided banners.
     
     
    Next print out a single copy on decal paper for the logos that are embossed directly onto the titan (the princeps rank badge and the titan-model badges for the lower legs.)
     
    The sheet has instructions on where you hang them from your models but there will a bit of creativity involved in getting the top-carapace legion banners strung up. I'm planning on drilling in a nice medal rod bannerpole atop the missile launcher onthe reaver.
     
     
    In any case, enjoy and I wish you titan fanatics the best in using this set for your forces. There will be further Titan Legions (including traitors) in the future.
     
    -bigred

    912 downloads

       (0 reviews)

    0 comments

    Submitted

  15. Legio Ignatum (Fire Wasps) Logo Sheet BOLS

    Hi Everybody, I've been going over many of the Titan legions from some of my ancient GW Epic books and picking another good looking scheme for the Loyalists. By popular request I settled on the Legio Ignatum (The Fire Wasps), with their menacing yellow and black striped carapace colors and with red/gold trim and black detail plating.
     
    I created the original logos in Adobe Illustrator.
     
    I would print out two copies on highgloss color printer paper, cuting out a pairs of banners for your titan, then glue them together to make matching double-sided banners.
     
    Next print out a single copy on decal paper for the logos that are embossed directly onto the titan (the princeps rank badge and the titan-model badges for the lower legs.)
     
    The sheet has instructions on where you hang them from your models but there will a bit of creativity involved in getting the top-carapace legion banners strung up. I would plan on drilling in a nice medal rod bannerpole atop the missile launcher on a reaver.
     
    In any case, enjoy and I wish you titan fanatics the best in using this set for your forces. There will be further Titan Legions (including traitors) in the future.
     
    -bigred

    1158 downloads

       (0 reviews)

    0 comments

    Submitted

  16. Legio Flaming Skulls (Traitors) Logo Sheet BOLS

    Hi Everybody, I've been going over many of the Titan legions from some of my ancient GW Epic books and picking another good looking scheme for the Traitors. I have settled on the Flaming Skulls Legio, with their fiery plating and tiger-striped carapace colors with gunmetal trim, these guys look mean! This is the traitor legio who swore over to Khorne, so you just know they are some bloodthirsy dudes!
     
    Gentleben and I created the original logos in Adobe Illustrator.
     
    I would print out a copy on highgloss color printer paper, cuting out a pair of banners for your titan, then glue them together to make matching double-sided banners
     
    Next print out a single copy on decal paper for the logos that are embossed directly onto the titan (the princeps rank badge and the titan-model badges for the lower legs.)
     
    The sheet has instructions on where you hang them from your models but there will a bit of creativity involved in getting the top-carapace legion banners strung up. I'm planning on drilling in a nice medal rod bannerpole atop the missile launcher on the reaver.
     
    In any case, enjoy and I wish you titan fanatics the best in using this set for your forces. For the Warmaster!!!
     
    -bigred

    686 downloads

       (0 reviews)

    0 comments

    Submitted

  17. Legio Astraman (Morning Starts) Logo Sheet BOLS

    Hi Everybody, I have had a fun week with my newly arrived copy of Adeptus Titanicus from way back in 1988! I've been going over many of the Titan legions from the box and picking another good looking scheme for the Loyalists. I settled on the Legio Astraman (The Morning Stars), with their lively green carapace color with yellow/gold trim and white and blue detail piping.
     
    I created the original logos in Adobe Illustrator.
     
    I would print out two copies on highgloss color printer paper, cuting out a pairs of banners for your titan, then glue them together to make matching double-sided banners.
     
    Next print out a single copy on decal paper for the logos that are embossed directly onto the titan (the princeps rank badge and the titan-model badges for the lower legs.)
     
    The sheet has instructions on where you hang them from your models but there will a bit of creativity involved in getting the top-carapace legion banners strung up. I would plan on drilling in a nice medal rod bannerpole atop the missile launcher on a reaver.
     
    In any case, enjoy and I wish you titan fanatics the best in using this set for your forces. There will be further Titan Legions (including traitors) in the future.
     
    -bigred

    978 downloads

       (0 reviews)

    0 comments

    Submitted

  18. Legio Astorum (Warp Runners) Logo Sheet BOLS

    Hi Everybody, I've been going over many of the Titan legions from some of my ancient GW Epic books and picking another good looking scheme for the Loyalists. I have settled on the Legio Astorum, with their cool blue with flames plating colors with gunmetal trim, these guys look slick! This is the legio who is featured in the Forgeworld Siege of Vraks series, so you will easily find lots of color plates of their sceme on different types of titans.
     
     
    I would print out a copy on highgloss color printer paper, cuting out a pair of banners for your titan, then glue them together to make matching double-sided banners. The sheet has instructions on where you hang them from your models but there will a bit of creativity involved in getting the top-carapace legion banners strung up. I'm planning on drilling in a nice medal rod bannerpole atop the missile launcher on the reaver.
     
    Next print out a single copy on decal paper for the logos that are embossed directly onto the titan (the princeps rank badge and the titan-model badges for the lower legs.)
     
    The sheet is designed for printout on decal printer paper which is easily available online. These decals are designed for the WHITE decal paper. The procedure is as follows:
     
    WHITE PAPER: This paper will allow you to use it directly over dark surfaces. Cut out the logos, and apply them directly over your fully painted models. Once dry, you can go back and touch up any edge defects with paint.
     
     
    Custom Decal Tutorial
     
    In any case, enjoy and I wish you titan fanatics the best in using this set for your forces. For the Emperor!!!

    896 downloads

       (0 reviews)

    0 comments

    Submitted

  19. Adeptus Mechanicus BOLS version

    Adeptus Mechanicus BOLS version

    1246 downloads

       (0 reviews)

    0 comments

    Submitted

  20. Adeptus Mechanicus Decal Sheet

    Adeptus Mechanicus Decal Sheet

    2782 downloads

       (0 reviews)

    0 comments

    Submitted


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.