alejandrinus Posted May 29, 2012 Share Posted May 29, 2012 Oh man this army is full of awesome work, your Dorn its perfect and you really has made the tartaros termis to look even good, the chaplain in tartaros armour is a good touch, really original, BTW its his head from the old metal chaplain in termi armour?, and thanks for sharing your tutorial of the land speeder. Keep up the good work dammed artificier Link to comment Share on other sites More sharing options...
the damned artificer Posted June 6, 2012 Author Share Posted June 6, 2012 Update time: Land Speeder has got a base: http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/LSBASE.jpg Updates on the cataphract termies, the axe is from the tartaros ccw set, and the mace in the back will be replaced with the mace from that set as well both of which I've bought through my favorite ebay bits store. The straps from the shoulders have also been added to 3 of them, 2 still awaiting theirs and there'll be a tutorial soon on how I made them and how I cast up the shoulderpads for these from my original design. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/CATAPHRACT.jpg The updated command squad, I ran out of grey primer so that's why the commander is only partially basecoated. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/DSCN2337copy.jpg Painting has commenced on the tartaros termies as well. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/TARTAROS.jpg And the chaplain has got a nice basic base paint job and a basecoat. More details will be added to the bases like leaves, skulls, shells etc later on. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/tartchaplain-1.jpg A closeup of the updated chaplain, his crozius arcaneum still needs a bit of green stuff work. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/CHAPLAINUP.jpg New sergeant for the veterans so they can be split up in two 5 man groups when Sigismund is in the command squad. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/VETSERGEANT.jpg And some small progress on Dorn, not much but the base gives him a bit extra. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/DORN.jpg Lastly a coupl of half random pics from my painting table. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/WIP1.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/WIP2.jpg Link to comment Share on other sites More sharing options...
Dosjetka Posted June 6, 2012 Share Posted June 6, 2012 Holy shiiiiiiiiiiiiizz! :D So. Much. Goodness. Gaaaaaaaaaah. :D Ludovic Link to comment Share on other sites More sharing options...
tagsta Posted June 6, 2012 Share Posted June 6, 2012 phenomenal update! may i ask for the color recipe for the bases? cheers Link to comment Share on other sites More sharing options...
the damned artificer Posted June 6, 2012 Author Share Posted June 6, 2012 Holy shiiiiiiiiiiiiizz! :P So. Much. Goodness. Gaaaaaaaaaah. :) Ludovic Thanks man, the army have become almost a form of therapy in between working on commissions, and I can assure you that there will be a whole lot more goodness in the future ;) I have plans for at least a squad of DA to join them too, a few members of the thousand sons and also an appearance from Lorgar's legion along with more heavy armour for the Imperial Fists to ;) phenomenal update! may i ask for the color recipe for the bases? cheers Yeah sure mate, and thanks ;) The bases are base coated in khemri brown and then blended up to a 50/50 mix of khemri brown and white leaving the darker nuances in the deeper recesses (all airbrushing) and then drybrushed with white. It's really simple but very effective and helps keep focus on the miniatures more than the bases without doing the lame sanded flat base theme that is too artistically dull for my taste :P Then it's spiced up with static grass turfts and other bling to give a natural look :) Link to comment Share on other sites More sharing options...
Terminatorinhell Posted June 6, 2012 Share Posted June 6, 2012 Wow those tartaros termies look fantastic, I also love your incredible mix of bits, it give an awesome character to every model! Link to comment Share on other sites More sharing options...
Dosjetka Posted June 6, 2012 Share Posted June 6, 2012 By the way, could I request a close-up of the Captain with the FW Raven Guard Captain head, please? :) Can't wait to see more! Ludovic Link to comment Share on other sites More sharing options...
the damned artificer Posted June 6, 2012 Author Share Posted June 6, 2012 Thanks guys :) And Ludovic, I'll see if I can get some closeups for you soon ;) Link to comment Share on other sites More sharing options...
Dosjetka Posted June 6, 2012 Share Posted June 6, 2012 And Ludovic, I'll see if I can get some closeups for you soon ;) Cheers mate, definitely appreciated :) Ludovic Link to comment Share on other sites More sharing options...
NightHunters Posted June 7, 2012 Share Posted June 7, 2012 Wow. Outstanding work, I was going to single out the Cataphract termies and Landspeeder for extra praise but then figured the others would be hard done by!! And possibly the best rendition of Dorn I have seen. Obviously a Primarch without being OTT. Mega :P :tu: Link to comment Share on other sites More sharing options...
Lachdannan Posted June 7, 2012 Share Posted June 7, 2012 Loving these updates. Those terminators really look nice. Tempted to get some of my own now. And Dorn looks really good. Think I might unashamedly copy him in the future.... Link to comment Share on other sites More sharing options...
Olis Posted June 8, 2012 Share Posted June 8, 2012 Excellent chaplains, brother, absolutely top job, my favourites of the lot. It's all great, really, what else is there to say? :lol: Link to comment Share on other sites More sharing options...
the damned artificer Posted June 8, 2012 Author Share Posted June 8, 2012 And Ludovic, I'll see if I can get some closeups for you soon ;) Cheers mate, definitely appreciated :) Ludovic Here ya go, hope they will suffice :) http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/closeups1.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/closeups2.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/closeups3.jpg Wow. Outstanding work, I was going to single out the Cataphract termies and Landspeeder for extra praise but then figured the others would be hard done by!! And possibly the best rendition of Dorn I have seen. Obviously a Primarch without being OTT. Mega :tu: :tu: Thanks a lot man. Loving these updates. Those terminators really look nice. Tempted to get some of my own now. And Dorn looks really good. Think I might unashamedly copy him in the future.... Thanks mate, and feel free to copy as much as you like :D But I will have to warn you that there's a LOT of cleanup and damage repair in store for you if you buy some tartaros termies, from the reviews online I get a distinct feeling that all the kits are more or less the same quality as mine with a lot of air bubbles, some not noticeable till you've cleaned the model up and some just under the surface leaving a veil of very thin resin too thin to sustain any form of handling without buckling and revealing major holes underneath. There's also a high rate of misaligned parts, especially on the shoulder pads and helmets, I only got one helmet out of six that was cast well enough for it to work from both sides, the remaining termies have very deliberately been made with the ugly sides facing inwards and hidden from view by the upper part of the collar. Excellent chaplains, brother, absolutely top job, my favourites of the lot. It's all great, really, what else is there to say? :) Thank you very much :D Link to comment Share on other sites More sharing options...
alejandrinus Posted June 8, 2012 Share Posted June 8, 2012 Fantastic work, every time you make an update is good news... :) Link to comment Share on other sites More sharing options...
Rune Priest Ridcully Posted June 8, 2012 Share Posted June 8, 2012 WOW, those are really nice, I'm now thinking of getting some tartaros terminators either for my thousand sons or to do a small heresy era Salamanders force (500-1000pts) What did you use as the base for Dorn as I am thinking of trying my hand at Vulkan, even if I don't do some Salamanders. Link to comment Share on other sites More sharing options...
the damned artificer Posted June 8, 2012 Author Share Posted June 8, 2012 Fantastic work, every time you make an update is good news... :) Why thank you my good sir, and I can give you some more good news then as I have an update ( of sorts at least) ;) http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2081copy.jpg This is a review of the silicone products for replicating personal parts sold by Lamenter over at http://masteroftheforge.com/store/ The products Blu-Stuff and Liquid Blu-Stuff is silicone based, fast setting putty and regular rubber with a 1:1 mix ratio. They are ideal for a vast amount of casting techniques and are compatible with most epoxy putties, plaster and resin (with exception of Smooth-Cast 300 Series products as there seems to be a negative chemical reaction between the two products). The following will be a small tutorial to how I've used the products in practical on a modelling project that benefits from both the products strengths. Then I'll summarize my experiences with the products and give them a rating in classic review style. Enjoy! ;) The project is to duplicate my shoulder pad design for my cataphract armoured terminators for my pre-heresy army. First step is to make a mould of the shoulder pad, I used the original and a replica cast with a previous mould to enable me to make new moulds containing a pair which can be cast up in one casting session. The shoulder pads are attached to a piece of plasticard to give an even surface for the top of the mould. Then a frame/form is constructed out of LEGO blocks and lined with plasticine to reduce excess waste of silicone. as this was my first mould with Liquid Blu-Stuff I took a few precautions and strengthened and sealed the frame/form to make sure it was liquid proof. This turned out to be a waste of time as the curing time of the silicone prevents it from running much before it sets. The next phase is to measure up equal parts of the silicone and miw them. The silicone is supplied with 2 mixing cups, but for this particular project I opted for some smaller ones I had myself as they were a bit more handy. The silicone is stirred carefully to avoid too many bubbles being trapped and when the colour is even it is poured into the frame/form in the corner to avoid air from being trapped as much as possible. After working on other forms with this I have concluded that due to the fast curing time of the silicone, more detailed parts can benefit hugely from having the silicone applied with an old brush first before filling the frame/form up as this helps catch the urface detail better and prevent bubbles. After 20 minutes curing time the silicone is completely set and ready to be removed, trimmed and used. I used Sika G26 Polyurethane Casting Resin from Sylmasta http://www.sylmasta.com/acatalog/copy_of_S...ing_Resins.html to cast the shoulder pads, and the only preperation I did to the moulds before casting was to dust them off with talcum powder which helps the resin flow and also to prevent too many bubbles. I made two moulds, and they worked out brilliantly. http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2082copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2085copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2090copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2093copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2094copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2096copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2100copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2102copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2109copy.jpg Then it was time to make my leather straps to cover the joints between the shoulder and the pads. I made a simple plasticard design and mounted it permanently on a piece of plasticard for an even surface for the final mould, I should have made it bigger so I could avoid getting an edge on the moulds which makes it harder to flatten the cast but I didn't want to redo it. Then I lined up equal measures of each part of the Blu-Stuff silicone putty and mixed them thoroughly til the colour was even, before pressing it onto the design. The putty cures very fast, and I found it hard to prevent bubbles from being trapped even though I rolled the putty up in a ball and pressed it out from the middle of the part, but it isn't a big problem on a cast like this and I'm sure practice makes perfect, I've definitely gotten better results with other press moulds with the putty afterwards. Since I need to make a lot of these I made 4 more moulds and used some green stuff to cast them as this allowed me to get them flexible enough to pose them and give them a natural heavy leather strap look with the right curves. It takes some practice to smooth the green stuff out in the mould as there is absolutely no traction from the form, it won't hold the putty in place and releases very easily even when the putty is still soft. My solution was to use a bit of saliva to prevent my sculpting tool from sticking to the green stuff (petrolium jelly might work as well but it will take some cleaning to get the greasy film off after the green stuff have cured) and tearing it out of the mould, and I am sure a rubber clay shaper would have been a better choice than my metal one. http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2273copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2275copy.jpg http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2290copy.jpg Then the casts, both resin and green stuff, were trimmed and cleaned and ready to use on the terminators. http://i535.photobucket.com/albums/ee354/SteffenSJensen/reviews/DSCN2294copy.jpg Summary: The products are extremely easy to use, they don't make a lot off mess as you can peal off any spills of silicone on your table and they speed up small mould making projects like rocket fuel ;) All in all I am very pleased with the results I've gotten. Liquid Blu-Stuff: Compared to the type of silicone I usually use which have a de-mould time of 24 hours according to the label (only 8 according to the specs on the website? but my personal experience is between 18-24 hours) this is super fast to use with a de-mould time of only 20 minutes!! This however makes it harder to get rid of bubbles and I'd personally recommend it for small/medium sized casting projects as I think it would be hard to cover parts properly without too much trapped air on larger parts as you really don't have a ot of time to work with it as the pot life is only around 2-3 minutes before it starts getting really thick. Price wise it is more expensive than the regular rubber I use which comes at £29.40 for 1kg as opposed to the £16.99 for 200 grams of liquid Blu-Stuff but the fact that it has a ridiculously short de-mould time ( again, only 20 minutes! ;) ) makes it well worth the money as it saves you a lot of precious modeling time, a thing most of us already have too little off. Based on the few disadvantages which is mainly the lack of time to prevent air bubbles and the slightly high pricetag I give it a 9/10 as the advantages of this rubber still far outweigh the disadvantages, and it really is a splendid tool for anyone who ventures in the realm of casting. Also check out the tutorial by Lamenter himself on using different epoxy putties with the product and others at http://masteroftheforge.com/category/4conv...ds-and-casting/ Blu-Stuff: I have played around with making press moulds for several years now, and have tried a few things like other putties for forms and latest the easymold re-usable sticks and based on my experience this product is in the top two of what I would recommend for making press moulds or resin casts without undercuts. The other one is instant mold. They each have their strengths and weaknesses. instant mold's strongest asset is the ability to re-use the material again and again and its flexibility, but the fact that you need to submerge it in hot water to soften it makes it hard to catch deep detail without trapping either air, water or both and that it hardens to a milky translucent colour makes it very hard to see if you actually captured the intended degree of detail. The Blu-Stuff silicone putty's biggest strengths are the weaknesses of instant mold, as it cures in a nice light blue colour where it is very easy to see if you got the desired degree of detail depth, and it doesn't need interference with water as it's a two component putty means that you only have to worry about trapping air and also the putty in uncured form is much softer than the instant mold gets even after being in boiling water. The downside is that it can't be reused and that makes it more suitable for press-moulds that is intended for use several times. it also lacks the flexibility of instant mold which means it restricts you to replicating things with very little or no undercuts. I personally thinks Blu-Stuff gives sharper and more defined edges than you get with instant mold which for some components like non organic objects is a big plus, and it renders softer curves just as well. It is neither better or worse than instant mold, as I would rate them the same and they are both invaluable tools for press-moulding and certainly the best on the market. The price is fair imo, you get a 100g for £9.99 and 200g for £15.99 which is okay. My rating is a solid 8/10 based on the fact that it is one of two equally good products available today, neither of which can be rated as perfect due to their separate weaknesses but they are still the best available and it'll be hard to top them. I hope you'll have enjoyed reading this review, I certainly had a fun time with these great products and will inevitably continue to :) Products kindly supplied by Lamenter, thank you mate. Link to comment Share on other sites More sharing options...
Lachdannan Posted June 8, 2012 Share Posted June 8, 2012 Awesome tutorial. This is really the next step for me modelling wise. Cheers for informing the ignorant! :) Link to comment Share on other sites More sharing options...
Hyaenidae Posted June 9, 2012 Share Posted June 9, 2012 Pretty much what Syth said. Thanks for sharing, bro! Have you tried larger/thicker parts yet? (aka guns, heads, torsos, etc) If so, how'd they turn out? Link to comment Share on other sites More sharing options...
Dosjetka Posted June 9, 2012 Share Posted June 9, 2012 Here ya go, hope they will suffice ;) Pefect! Thanks a million, mate! :( Ludovic Link to comment Share on other sites More sharing options...
the damned artificer Posted June 9, 2012 Author Share Posted June 9, 2012 Awesome tutorial. This is really the next step for me modelling wise. Cheers for informing the ignorant! :yes: Ohh, now that sounds interesting ^_^ hope you get as much fun out of it as I have had so far :P Pretty much what Syth said. Thanks for sharing, bro! Have you tried larger/thicker parts yet? (aka guns, heads, torsos, etc) If so, how'd they turn out? I've cast up bigger and more complex parts too, it shouldn't be a problem making two part mould from the liquid blu-stuff, you just need to get your hands on a release agent as well as silicone bonds to silicone. I have made a few moulds where I just encased the entire model in the liquid blu-stuff and then cut up the mould afterwards, which actually works pretty well too an you don't need release agent. However this is not something I'd recommend for larger pieces as it's easier two do it in 2 steps :) Here ya go, hope they will suffice :) Pefect! Thanks a million, mate! ;) Ludovic You're welcome mate ;) Link to comment Share on other sites More sharing options...
Captain Juan Juarez Posted June 9, 2012 Share Posted June 9, 2012 I could actually hate you, but you're from Denmark so that makes it all but impossible.. Gah@ irrational liking of Danes! EDIT: Translation: I'm jealous of your extremely awesome work. Link to comment Share on other sites More sharing options...
the damned artificer Posted June 9, 2012 Author Share Posted June 9, 2012 I could actually hate you, but you're from Denmark so that makes it all but impossible.. Gah@ irrational liking of Danes! EDIT: Translation: I'm jealous of your extremely awesome work. Hehe thanks ^_^ An irrational liking of Danes, now that's a new one XD I'd love to know the reason(s) why :P Link to comment Share on other sites More sharing options...
the damned artificer Posted August 10, 2012 Author Share Posted August 10, 2012 Time for a small update, as I've been asked to showcase some mniatures tomorrow at a Danish tournament I thought it would be fitting to get some of the fists done, so here's a little WIP of how things were looking yesterday :D Closeups will follow after the weekend (and me finishing painting them tonight) So here's what I hope to be done with by tonight, but realistically I'll probably not manage to finish the speeder and commander but I'll try. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/DSCN2641copy.jpg Here's the progress on the commander so far. http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/DSCN2650copy.jpg And the speeder have also gotten some yellow (finally) :P http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/DSCN2648copy.jpg All the while the crew is pole dancing :) http://i535.photobucket.com/albums/ee354/SteffenSJensen/Pre-heresy%20Imperial%20Fists/DSCN2649copy.jpg That's all for now, gotta go paint some more :( Link to comment Share on other sites More sharing options...
Armond Posted August 10, 2012 Share Posted August 10, 2012 Love your work, beautiful painting and modelling! Link to comment Share on other sites More sharing options...
Reyner Posted August 10, 2012 Share Posted August 10, 2012 Nice casting review, I'll try that at some point. How do you paint your yellow? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.