Jump to content

My deathwing themed SM army.


KorNat

Recommended Posts

Hi
I would like to share to you my Space Marines army i am trying to finish from some time.
Till now I finished the Rhino. Soon I will post my Tacticals.
What do you think about this painting scheme?

 

http://3.bp.blogspot.com/-vNP3Tm4VBqY/VARrNFWZAhI/AAAAAAAAAaE/S5RrU8Flwe8/s1600/Space%2BMarines%2BRhino.jpg

Link to comment
Share on other sites

You are right. I made the decals after wathering. It was a mistake and it will not happen again. It was my first ever painted vehicle.

I managed to finished some of my regular troops yesterday.

 

 

http://1.bp.blogspot.com/-40f_6z-UVEA/VAR3MFNCzGI/AAAAAAAAAaQ/MKWIP63bqR8/s1600/Space%2BMarines%2B1.jpg

Link to comment
Share on other sites

I accept your apology. laugh.png

Anyway, you clearly know what you're doing here.

I can't imagine how many times I tried to get that sort of bone texture on my troops. However I can quite easily recall the number of times it worked: 0.

mellow.png

The basing is well done, too. That's always an easy part to overlook. What are you using to make those surfaces?

My one sticking point is the limited palette. A limited palette is a very good thing, and keeps the process smooth, while the models don't end up looking very cluttered. But with exception to the one green cloth, everything is either bone or red. A dash of metallic somewhere could be good, and would be relatively neutral so as to not send the color wheel spinning out of control (ugh, lousy metaphor). It could be especially useful somewhere on their backs, because the Bolters already kind of do that up front.

Also, blank purity seals. Shame on you. :P

Link to comment
Share on other sites

I accept your apology. laugh.png

Anyway, you clearly know what you're doing here.

I can't imagine how many times I tried to get that sort of bone texture on my troops. However I can quite easily recall the number of times it worked: 0.

mellow.png

The basing is well done, too. That's always an easy part to overlook. What are you using to make those surfaces?

My one sticking point is the limited palette. A limited palette is a very good thing, and keeps the process smooth, while the models don't end up looking very cluttered. But with exception to the one green cloth, everything is either bone or red. A dash of metallic somewhere could be good, and would be relatively neutral so as to not send the color wheel spinning out of control (ugh, lousy metaphor). It could be especially useful somewhere on their backs, because the Bolters already kind of do that up front.

Also, blank purity seals. Shame on you. tongue.png

I appreciate your acceptance biggrin.png

For my basing I usualy use some pieces of plasticards, sand, small rocks and bits from old SM pod. I paint them with several greys and apply two or three pigments. - nothing special but it's nice to read that somebody finds them intresting.

I've started to paint this army when I got back to hobby in 2009 after reading that topic http://www.bolterandchainsword.com/topic/149164-my-doublewing-dw-squad-finished/

and I wanted to stick to the paint scheme I really liked then. Now I also think that I've missed something in that color scheme on those SMs. I will try to something with that when I be finishing another tactical squad. Thank you for your observations.

As far as purity seals are concerned I am afraid of any of my freehands biggrin.png

Link to comment
Share on other sites

Man that recipe looks like a pain in the ass.  Not to mention the discontinuation of Flesh Wash and Gryph Sepia (a true loss, that one, right up there with Badab Black).

 

Can't argue with the results much, though.

 

Is yours identical, or are you using replacement tricks and new techniques?  You obviously got yourself into the weathering powders, after all.

Link to comment
Share on other sites

I tried to replicate that using available products. That method is very slow and boring if someone is planning to paint more miniatures but i like the warm color of finished miniatures and I couldn't achive similar effect using white primer. Rhino is painted  differently - I used airbrush and color modulation technique as shown here https://app.box.com/s/q27ghfoaxnxi3p2n3m1g . It was the first time I used it and this is the main reason why SMs have different color scheme than Rhino.

Link to comment
Share on other sites

Yeah, I'm a fan of that airbrush technique. I don't quite understand the logic behind the panel lighting, and I think it looks rather weird really, even if it is much easier to do.

Zenithal is, in my opinion, best left to infantry models.

Even though the colors are a tad different, the Rhino and the Marines still look proper beside one another. There's just a touch more yellow tint on the Rhino.

Kinda surprised you're not getting more feedback on these guys, really. mellow.png

Link to comment
Share on other sites

  • 3 weeks later...

Thank U all for your feedback. I will take it into consideration while finishing the rest of the army. It's very motivating to read all those entusiastic comments.

 

They're really nice; have you considered weathering the marines a little bit to bring them more in line with the bases/vehicles? That could tie them to the base better and tie the army in very nicely.

 

When I was initialy painting those models I;ve never thought that they will become a single army cause I wasn't a WH40K gamer. I've  been painting them separately only for fun looking for proper color scheme. Now i think that with some more work I can make them a cohesive group and I will try to keep new models similar to those already presented. However I think I overdo the weathering of the Rhino:D

I manage to finish some more SMs so the entire Tactical Squad is ready. Enjoy the photos. Next unit will be certainly weathered a little more.

http://1.bp.blogspot.com/-TXeYWMiMh8k/VB0xbSviBeI/AAAAAAAAAKo/zAyxykxyHaE/s1600/Space%2BMarines%2B2.jpg

Link to comment
Share on other sites

Nice concept, nice painting, nice squad ! The "2 colors" scheme is really beautiful and efficient, and I like the concept of using an existing concept and pushing it at the border of a DiY chapter. Last but not least, you master the ivory color :)

Keep it up, I'll definitly follow the progress on this wonderful army.

Link to comment
Share on other sites

I'm not sure about the brown weathering streaks on the missile launcher backpack.  That effect isn't present anywhere else, and there's not much reason that the only place it would show up is beneath a skull decoration on a backpack. :lol:

 

Aside from that, it seems that things are proceeding swimmingly. 

Link to comment
Share on other sites

Looks excellent so far- your weathering is very well done!

 

Personally, I don't think the marines need to be as weathered as the vehicle- makes sense to me that the transport would be more weathered than the troops inside it...

 

Could you take some close up pictures of the rhino?

Link to comment
Share on other sites

I'm not sure about the brown weathering streaks on the missile launcher backpack.  That effect isn't present anywhere else, and there's not much reason that the only place it would show up is beneath a skull decoration on a backpack. 

 

I' m totally not sure either but I suck in painting flat surfaces and I needed to invent something.

 

Could you take some close up pictures of the rhino?

 

I will take some photos when I finally arrive at my place. Staty tuned.

 

Love the bases! Any chance if a quick tutorial?

 

I think that these are nothing special. As usual you take some sand, small rocks, several old bits and glue them together to the base. Then paint it in dark brown and drybrush several  layers of greys.; final drybrush shoul be white or ivory.  Rust metal is painted with mix od browns and reds.  The last step is adding some pigments  mix with water and then harden with isopropanol or matt varnish.

Link to comment
Share on other sites

  • 1 month later...

After some fantasy projects I'm back in the service of the Emperor.

Here are some WIPs of my Termies. What do you think about that? Should I add more bright colors or something. I am looking for some comments before going public whith that unit.

 

http://i61.tinypic.com/24xf7yp.jpg

http://i57.tinypic.com/34fe6hs.jpg

Link to comment
Share on other sites

  • 3 weeks later...

After a very long time I've finally finished a new unit at http://pinatwar.blogspot.com/2014/11/space-marines-terminators.html

C&C

 

http://2.bp.blogspot.com/-kZd7SsDMj0w/VGxdTby0XlI/AAAAAAAAANE/uNmM4y9EoWw/s1600/DSCF0660.JPG

 

http://4.bp.blogspot.com/-7hoo7SsVeAI/VGxdTQLvvCI/AAAAAAAAAMs/YxLlN127sOs/s1600/DSCF0661.JPG

 

http://1.bp.blogspot.com/-MvKVzrsHA_M/VGxdULJseNI/AAAAAAAAAM0/Q4zux2H3y78/s1600/DSCF0662.JPG

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.