WarriorFish Posted December 6, 2017 Share Posted December 6, 2017 Love the hazard stripes on the bayonet and lovely colours as always. Particularly like the chest aquila and scribble script :tu: UltraRich 1 Back to top Link to comment Share on other sites More sharing options...
duz_ Posted December 6, 2017 Share Posted December 6, 2017 Awesome look great! Whyd you go the shooty ones? Also not a fan of their grenade gauntlets? Link to comment Share on other sites More sharing options...
Bjorn Firewalker Posted December 7, 2017 Share Posted December 7, 2017 Good job on the Ogryn. UltraRich 1 Back to top Link to comment Share on other sites More sharing options...
UltraRich Posted December 7, 2017 Author Share Posted December 7, 2017 Awesome look great! Whyd you go the shooty ones? Also not a fan of their grenade gauntlets? Thanks. Do you mean the grenade launchers? Link to comment Share on other sites More sharing options...
duz_ Posted December 7, 2017 Share Posted December 7, 2017 Yes! Awesome look great!Whyd you go the shooty ones?Also not a fan of their grenade gauntlets? Thanks. Do you mean the grenade launchers? Yes Link to comment Share on other sites More sharing options...
UltraRich Posted December 8, 2017 Author Share Posted December 8, 2017 (edited) Yes! Yes Ive got these two EDIT: you can see the point between painting that I changed my skin style to use blended purple/browns for shading and not a straight wash (on the left vs blend on the right) Edited March 26, 2020 by UltraRich Dr_Ruminahui, Bjorn Firewalker, walter h and 3 others 6 Back to top Link to comment Share on other sites More sharing options...
Bjorn Firewalker Posted December 8, 2017 Share Posted December 8, 2017 Again, good job on the Ogryns. UltraRich 1 Back to top Link to comment Share on other sites More sharing options...
UltraRich Posted December 13, 2017 Author Share Posted December 13, 2017 (edited) I built another Ogryn with some of the spare parts I had I had an idea of a powerfist and at first used one of the Grey knight walker ones but the fingers were too small so I went for it with GS I didnt want it to be too Orky so I tried to scale up one of the smaller IG versions I am going to paint his fist red though Edited March 26, 2020 by UltraRich our_baz, Arkaniss, brother_b and 4 others 7 Back to top Link to comment Share on other sites More sharing options...
Bjorn Firewalker Posted December 13, 2017 Share Posted December 13, 2017 Your handmade power fist looks promising. Link to comment Share on other sites More sharing options...
The Ergonomic Enginseer Posted December 14, 2017 Share Posted December 14, 2017 Your "Hellboy" is looking great but isn't meant to be a red right hand not left? Still your Ogryn look fantastic. Link to comment Share on other sites More sharing options...
Bjorn Firewalker Posted December 14, 2017 Share Posted December 14, 2017 Your "Hellboy" is looking great but isn't meant to be a red right hand not left? Hellboy should be a Primarch, maybe a modified Magnus the Red model. Besides, the Ogryn's power fist has five fingers (including the thumb), while the Right Hand of Doom only has four. The Ergonomic Enginseer 1 Back to top Link to comment Share on other sites More sharing options...
The Pounder Posted December 14, 2017 Share Posted December 14, 2017 First time I can remember seeing this, all I can say is WOW!! I’m building up a “forces of Ultramar” army based around Ultramarines and Death Korps of Krieg. The army badge I’m using is a white skull too! I suppose it’s 40k (if in doubt add more skulls) I’m really impressed with your subtle kit bashes and conversions. Link to comment Share on other sites More sharing options...
UltraRich Posted December 14, 2017 Author Share Posted December 14, 2017 Thanks for the comments. I would have done the fist on the other arm but they are the only ones with weapons on had to switch it. I also had a go at a three fat fingered hand but it looked way too Orky. Got a couple of other bits to do to it but will look to paint up this weekend duz_ 1 Back to top Link to comment Share on other sites More sharing options...
UltraRich Posted December 30, 2017 Author Share Posted December 30, 2017 (edited) Ive done some more work on my AOP board Strongpoint Im looking to build it up and put a blast door in the middle of the two lower emplacements. Ill plasticard the rest of the building and add detail later. What do you think to the two mounted autoguns though? OTT? Edited March 26, 2020 by UltraRich WarriorFish and duz_ 2 Back to top Link to comment Share on other sites More sharing options...
Tallarn Commander Posted December 31, 2017 Share Posted December 31, 2017 The guns look great. It's unsolicited advice, but you might want to slip some plasticard under the gun on the right. That way its base will match the gun on the left. :) UltraRich 1 Back to top Link to comment Share on other sites More sharing options...
UltraRich Posted December 31, 2017 Author Share Posted December 31, 2017 (edited) Thanks for the quick reply TC That's all just balanced at the moment Im going to trim it all and then edge it with plasticard. The guns will then sit in their respective base rings mounted on top of the bastions either side of the door Edited December 31, 2017 by UltraRich Link to comment Share on other sites More sharing options...
duz_ Posted December 31, 2017 Share Posted December 31, 2017 I have no objection to the gun emplacements either. :) Although they need to be BIGGER!!! ;) :D UltraRich 1 Back to top Link to comment Share on other sites More sharing options...
WarriorFish Posted December 31, 2017 Share Posted December 31, 2017 They're fine, it makes it more Imperial if after building a big fortification they slap guns on top :P Should be quite the centre piece when complete :tu: Link to comment Share on other sites More sharing options...
UltraRich Posted January 1, 2018 Author Share Posted January 1, 2018 (edited) Had another hour on this today and got the base walls in place and glued. Ive got to wait until tomorrow until its all dried and then it all needs sanding. Once thats done I can add the trim around the lip on the new lower floor. Ive also got the problem that I need to add the same corbels that are present on all the bastion bits. These are the little brackets that you can see spaced about 5mm apart. I think Im going to have to do a GS mould to make them properly. I also need to wait until I get some more 2mm plasticard to finish the back and the base. Im going to have a go at building some pipework to detail the right side below the tower. I can throw a few barrels there too to detail it. Edited March 26, 2020 by UltraRich The Ergonomic Enginseer, walter h, WarriorFish and 1 other 4 Back to top Link to comment Share on other sites More sharing options...
UltraRich Posted January 1, 2018 Author Share Posted January 1, 2018 (edited) And we now have a blast door. it makes it look a lot more Imperial! It still needs rivets, and a couple of grebles but its about done The Aquila was done by printing an 8cm Aquila onto plain paper and then gluing it to 1mm plasticard. It was then a case of cutting each bit out and then re assembling it when sticking it to the door There are a couple of bits to touch up but Im going to add damage anyway so Im not too worried Edited March 26, 2020 by UltraRich CaptainDangerous, The Ergonomic Enginseer, iceman2160 and 3 others 6 Back to top Link to comment Share on other sites More sharing options...
Tallarn Commander Posted January 2, 2018 Share Posted January 2, 2018 Great job! Are you going to paint it green like your tanks? Link to comment Share on other sites More sharing options...
UltraRich Posted January 2, 2018 Author Share Posted January 2, 2018 Great job! Are you going to paint it green like your tanks? Thanks Im probably going to do it grey (like the base of my Knight) Im thinking a muddy base, grey weather beaten walls and this will make the greens pop more. If I paint it all green then everything will be blended too much walter h and duz_ 2 Back to top Link to comment Share on other sites More sharing options...
UltraRich Posted January 3, 2018 Author Share Posted January 3, 2018 (edited) Thats the door finished and ready for paint Its had a few bullet holes added, a wash with milky milliput to give it some texture and a few rivets added Its all primed now and ready for a paint. Im going to try and get this finished to kick off the scheme for the bastion Edited March 26, 2020 by UltraRich walter h, our_baz, duz_ and 2 others 5 Back to top Link to comment Share on other sites More sharing options...
duz_ Posted January 3, 2018 Share Posted January 3, 2018 Looks awesome even in primer grey! :tu: UltraRich 1 Back to top Link to comment Share on other sites More sharing options...
WarriorFish Posted January 3, 2018 Share Posted January 3, 2018 The holes are well done, it'll really pop when all painted up great stuff :) UltraRich 1 Back to top Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now