Just4uCupCake Posted September 11, 2015 Share Posted September 11, 2015 Hey guys Im going to order 3 contemptors and 10 arms so I can switch them out, any tips or what size magnets you use? Link to comment Share on other sites More sharing options...
Grotsmasha Posted September 11, 2015 Share Posted September 11, 2015 I personally used 2mmx1mm round magnets which were plenty strong enough to hold and pose the arms. Link to comment Share on other sites More sharing options...
treadhead Posted September 11, 2015 Share Posted September 11, 2015 2mm x1mm disc magnets http://i21.photobucket.com/albums/b264/treadhead2/DSCF0612.jpg Wasn't too tricky just keep watch on the magnetic poles and drill holes depths One trick though is to give the magnets a solid coat of paint to help keep them sealed in as firmly as possible Link to comment Share on other sites More sharing options...
furstyferret Posted September 29, 2015 Share Posted September 29, 2015 Mine uses the same as the Ultra one above. It holds perfectly well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.