Third party miniatures [Vanguard Miniatures] Mar 10: Zeus Grand Cruiser + Cybershadow ships

[malika666]

Cybershadows air support incoming!

 

Cybershadow – G-2100 Heavy Gunship

 

The Cybershadow Technocracy has a great many aircraft in service, everything from light utility run arounds and dedicated aerospace fighters to heavy landers and dropships. The G-2100 heavy gunship serves the Technocracies ground forces in a close air support roll. Two large VTOL rotatable thruster engines allow the aircraft to hover on station much like a conventional helicopter as well as providing the massive thrust required to speed such a heavy craft about the battlefield. The ventral fuselage has many anti-grav plates installed which provide additional lift and stability.

 

Heavy armour and three shield emitters provide the craft with a strong defensive suite, this coupled with modular weapons hard points make for an effective combination of speed, defence and firepower.

 

Observed weapons fits have included, conventional heavy machine guns, rotary cannon, medium and heavy energy weapons, missile pods and guided bombs to name a few.

 

Set contains:

 

1 x Heavy gunship hull

 

1 x VTOL thrusters sprue

 

1 x Tail fins sprue

 

2 x Weapons sprues

 

Notes:

 

Full resin cast kit

Model approximate dimensions, length 90mms (not including nose turret weapon), width 50mms including thrusters, height 20mms

Games Workshop model show for scale purposes only (without permission)

https://vanguardminiatures.co.uk/shop/cybershadow-g-2100-heavy-gunship/

[malika666]

Several new releases today.

 

Cybershadow Fleet – Destroyers

Set contains:

 

2 x Destroyer hulls (2 variants, gun batteries and fighter launch bays)

 

1 x Components sprue

 

1 x Turrets sprue

 

Notes:

 

These are resin cast models

Model length 31mms

https://vanguardminiatures.co.uk/shop/cybershadow-fleet-destroyers/

 

Renegade Fleet – Logistics Carriers

Renegade Logistics Vessels (even the bad guys need logistics support)

 

Set contains:

 

1 x long hull

 

1 x short hull

 

3 x prow options (fit both ships)

 

1 x components sprue

 

2 x cargo pod sprues

 

Notes:

 

These are complete resin cast models

Model lengths, 70mms and 50mms

The cargo pods are the same as on the Novan Logistics carrier

https://vanguardminiatures.co.uk/shop/renegade-fleet-logistic-carriers/

 

3mm Skinners – Rocket Tanks

Skinners tank with rocket turrets

 

Set contains:

 

8 x tank hulls (4 variants)

 

8 x rocket turrets (4 variants)

https://vanguardminiatures.co.uk/shop/3mm-skinners-rocket-tanks/

 

Tower Roof

A solid resin cast tower rooftop formerly available as part of the Habitorum plastic tiles set, now available separately.

 

1 x resin dome

 

Notes:

1. Base 50mms square, height 55mms

https://vanguardminiatures.co.uk/shop/tower-roof/

[malika666]

New Elites out!

 

Novan Elites B – Recon Teams

Novan Elite Recon Teams

 

Set contains:

 

4 x squad leaders

 

4 x comms operators

 

33 x recon troopers

 

2 x prone snipers

 

2 x troopers sat down taking cover (2 x wall debris pieces to take cover behind)

https://vanguardminiatures.co.uk/shop/novan-elites-b-recon-teams/

[malika666]

New printed terrain out!

 

So many moons ago Troublemaker Games did a Kickstarter campaign for 3D printable terrain. Now Vanguard Miniatures is stocking some of those items, selling them as printed items (no need to ask for STL's here).

 

Small Gas Tanks

Set of four different small gas tanks compatible with Troublemaker Games plastic terrain sets

 

Notes:

 

-Resin printed product

-8mm tall infantry figure show for size purposes only

https://vanguardminiatures.co.uk/shop/small-gas-tanks/

 

Roof Top Vents

Set of four different roof top vents compatible with Troublemaker Games plastic terrain sets

 

Notes:

 

-Resin printed product

-8mm tall infantry figure show for size purposes only

https://vanguardminiatures.co.uk/shop/roof-top-vents/

[malika666]

Eloi reinforcements inbound!

 

Eloi Federation – Grav-bike Squadron

The Eloi are masters of anti-gravity technology with the majority of their military vehicles employing anti-grav technology, the Grav-bike is one of the smallest produced, a one person skimmer capable of very high speed utilised as a recon and light raider asset.

 

Set contains:

 

12 x grav-bikes

 

6 x rail cannon grav-bikes

 

1 x squadron leader grav-bike

 

1 x Way Seeker grav-bike

 

Plastic stands not included.

https://vanguardminiatures.co.uk/shop/eloi-federation-grav-bikes-squadron/

[malika666]

More releases!

 

First up some fleetscale stuff:

 

Cybershadow Fleet – Heavy Frigate

Set contains:

 

1 x heavy frigate hull

 

3 x prow options

 

7 x broadsides modules options

 

1 x turrets sprue

 

Notes:

 

1.Resin cast model

 

2. Model approximate length, 50mms not including prow cannon

 

3. Modules are compatible with the following models: Panthera heavy frigate, Novan logistics carrier and Renegade logistics carrier.

 

4. Prows are compatible with the following models: Cybershadows light cruiser, Renegade logistics carrier

https://vanguardminiatures.co.uk/shop/cybershadow-fleet-heavy-frigate/

 

Cybershadow Fleet – Heavy Frigate Broadsides Set

Set contains:

 

2 x sprues with 7 broadsides options

 

Notes:

 

1) Full resin cast set

 

2) Designed to fit the Cybershadow heavy frigate kit

 

3) Individual module dimensions approximately, length 18mms, height 6mms

 

4) Modules are compatible with the following models, Panthera heavy frigate, Novan logistics carrier and Renegade logistics carrier.

https://vanguardminiatures.co.uk/shop/cybershadow-fleet-heavy-frigate-broadsides-set/

 

And of course we can't forget the regular 6mm/8mm/whatever scaled stuff!

 

Skinners – Skuey Utility Chopper

Skinners utility helicopter with two optional rotary cannon.

 

Set contains:

 

1 x hull sprue

 

2 x component sprues

 

Notes:

 

1)Resin cast model

 

2)Model approximate length, 68mms

 

3)Aeronautica Imperialis model only shown for scaling purposes

https://vanguardminiatures.co.uk/shop/skinners-skuey-utility-chopper/

[malika666]

There are a whole bunch of new releases in the pipeline. A few teasers of those have been added to Vanguard Miniatures' very unofficial Instagram fanpage.

 

Updated Falcon Gunship for the Novan Regulars:

https://www.instagram.com/p/CWKxeyPKlXc/

 

Novan Elites type B armour command unit:

https://www.instagram.com/p/CWFuuXcqY48/

 

Light Stalker:

https://www.instagram.com/p/CWU2d7fKOmz/

 

Renegade Hecate Interceptor mk2:

https://www.instagram.com/p/CWazRnQqAS1/

 

Beefed up Novan Convent Redeemer walker:

https://www.instagram.com/p/CV0vOMsNk4Q/

[sitnam]

Chaos flyers! Are these scales for modern IA?

[malika666]

The new flyers are all scaled for modern IA.

[malika666]

A bunch of new releases!

 

Novan Regulars – Siege Troops Casualties

Casualty figures that can be added to bases to create little vignettes and or for making 3D damage/wound/suppression markers, or anything else you can think of.

 

Set contains:

 

4 x casualties sprues (24 x figures in 6 poses)

 

1 x Quarter master team sprue (4 x figures)

 

28 x figures in total

https://vanguardminiatures.co.uk/shop/novan-regulars-siege-troops-casualties/

 

Novan Regulars – Siege Troops Tank Riders

These figures are designed to add to tanks and or trucks etc as transported troops.

 

Set contains:

 

1 x command sprue( kneeling/crouched)

 

2 x troopers sprue (kneeling/crouched)

 

1 x troopers sprue no rifles (sat down)

 

4 x troopers spues with rifles (sat down)

 

30 x figures

 

Note:

 

Please note that due to the nature of their use these figures can be incredibly fiddly to work with and fix to your models so some patience is required to work with these figures. Contact patches for gluing the figures for example are very small so thy may be easily dislodged with heavy handling. I would suggest using them on a special spare model so that model can be added to a formation to visually note that troops are being transported on the vehicles, remove once the troops re deployed.

https://vanguardminiatures.co.uk/shop/novan-regulars-siege-troops-tank-riders/

 

And some 3mm reinforcements for the Skinners:

 

3mm Skinners – Flamethrower Tanks

Skinners tank with flamethrower turrets

 

Set contains:

 

8 x tank hulls (4 variants)

 

8 x flamethrower turrets (4 variants)

https://vanguardminiatures.co.uk/shop/3mm-skinners-flamethrower-tanks/

 

3mm Skinners – Beam Cannon Tanks

Skinners tank with beam cannon turrets

 

Set contains:

 

8 x tank hulls (4 variants)

 

8 x beam cannon turrets (4 variants)

https://vanguardminiatures.co.uk/shop/3mm-skinners-beam-cannon-tanks/

[malika666]

A while back Troublemaker Games ran another successful Kickstarter campaign. Some of those items are now available through Vanguard Miniatures!

 

Tribal Skinners – Mega Finback War Beast

Set contains:

 

1 x resin cast mega finback (three components)

 

1 x resin howdah

 

1 x parts sprue

 

1 x gunners sprue (2 Gobblers gunners, 4 Skinners with heavy shooters)

 

1 x passengers sprue (10 figures with axes)

 

Notes:

 

Beast approximate dimensions, length 75mms, height 36mms to the shoulder

Small finback show for size comparison only and is not included in this set

https://vanguardminiatures.co.uk/shop/tribal-skinners-mega-finback-war-beast/

 

Novan Regulars – Argos Drakon Flamethrower

Set contains:

 

3 x Argos Dracon hulls

 

3 x flamethrower turrets

https://vanguardminiatures.co.uk/shop/novan-regulars-argos-drakon-flamethrower/

[malika666]

A whole bunch of new releases!

 

Renegade – Hecate II Interceptor

Renegade Hecate Mk2 Interceptor

 

Manoeuvrable and well armed, Hecate Interceptors are powered by nuclear cells, such that even in death their pilots may bring woe.

 

Sets contains:

 

1 x Hecate Interceptor hull

 

2 x Hecate components sprues

 

Notes:

 

1) Model length: 71mms (note that this model is larger than the old metal Hecate)

2) Fully resin cast model kit

3) Model can be assembled in flight mode or landed

4) Several weapon options included

https://vanguardminiatures.co.uk/shop/renegade-hecate-ii-interceptor/

 

Cybershadow – Heavy Grav-APC

Set contains:

 

1 x complete model on 4 x component sprues

 

Notes:

 

1) Model approximate dimensions, L 65mms, W 30mms, H 22mms not including turret

2) Fully resin cast model kit

https://vanguardminiatures.co.uk/shop/cybershadow-heavy-grav-apc/

 

Novan Elites – Champions

Novan Elites Legion Champions.

 

Set contains:

 

3 x Champions sprues (15 figures in 5 variants)

https://vanguardminiatures.co.uk/shop/novan-elites-b-champions/

 

Novan Regulars – Siege Troops High Command

Set contains:

 

2 x standard bearer sprues

 

2 x banner sprues

 

1 x officers sprue (1 x Lord Marshall, 1 x Adjutant, 1 x Political officer with mask, 1 x Political officer unmasked)

 

22 figures in total

https://vanguardminiatures.co.uk/shop/novan-regulars-siege-troops-high-command/

 

Eloi Federation – Scouts

Set contains:

 

3 x sprue A (6 poses)

 

3 x sprue B (6 poses)

 

36 figures in total

https://vanguardminiatures.co.uk/shop/eloi-federation-scouts/

 

Sentinel – Shades

Set contains:

 

4 x torso sprues

 

4 x tail sprues

 

Enough parts to create 12 Sentinels Shades

https://vanguardminiatures.co.uk/shop/sentinel-shades/

[Raziel-TX]

Very cool!

[malika666]

Some new releases!

 

Novan Regulars – Heavy Field Mortar Battery

Set contains:

 

4 x Heavy field mortars with ammunition boxes

 

4 x Novan light logistics trailers

https://vanguardminiatures.co.uk/shop/novan-regulars-heavy-field-mortar-battery/

 

Novan Regulars – Heavy Quad Launcher Battery

Set contains:

 

4 x Heavy field quad launchers with ammunition boxes

 

4 x Novan light logistics trailers

https://vanguardminiatures.co.uk/shop/novan-regulars-heavy-quad-launcher-battery/

 

Novan Fleet – Zeus Pattern Cruiser Prows

Set contains six variant Zeus pattern cruiser prows

 

1 x heavy cannon prow, 1 x torpedo prow with spear ram, 1 x Trireme ram prow

 

1 x torpedo prow, 1 x spear ram prow, 1 x torpedo prow with Trireme ram

https://vanguardminiatures.co.uk/shop/novan-fleet-zeus-pattern-cruiser-prows/

 

Zeus Pattern Cruiser Prows (Eagle Figurehead)

Set contains six variant Zeus pattern cruiser prows with Eagle figureheads

 

1 x torpedo prow, 1 x torpedo prow with spear ram, 1 x torpedo prow with Trireme ram

 

1 x heavy cannon prow, 1 x spear ram prow, 1 x Trireme prow

https://vanguardminiatures.co.uk/shop/novan-fleet-zeus-pattern-cruiser-prows-eagle-figurehead/

[malika666]

A whole bunch of new releases!

 

Novan Regulars – Jungle Rangers Scout Striders

The Scout class Strider light walker has served with Tusculum Nova’s Regular forces since there founding and has seen many variants over the years. Primarily used as a light scout vehicle and also occasionally in the infantry support roll, it can be found on practically ever world of the Commonwealth. In concert with its larger cousin the Battle class these two very successful walker designs have been pivotal in Tusculum Nova’s developing combat walker programs.

 

This set contain:

 

4 x Strider open cockpit hulls – Armed with vegetation chain-blade cutters and flamethrowers

 

4 x Strider legs in four poses

 

Notes:

 

Model height approx. 19mm

https://vanguardminiatures.co.uk/shop/novan-regulars-jungle-rangers-scout-striders/

 

Renegade Militia – Casualties

Set contains:

 

30 x militia casualties in 5 poses (note these figures are double sided)

https://vanguardminiatures.co.uk/shop/renegade-militia-casualties/

 

Renegade Militia – Heavy Anti-aircraft Gun Crews

Note these crew figures could also be used for large anti-tank gun crews or any other ordnance piece requiring large shells.

 

Set contains:

 

30 x gun crews in five poses

https://vanguardminiatures.co.uk/shop/renegade-militia-heavy-anti-aircraft-gun-crews/

 

Renegade Militia – Artillery Crews

Set contains:

 

10 x crew for mounting on self-propelled guns or gun platforms (five poses)

 

22 x crew figures with regular figure bases (11 poses)

https://vanguardminiatures.co.uk/shop/renegade-militia-artillery-crews/

 

Renegade Militia – Infantry

Set contains:

 

40 x militia infantry (including 4 x squad leaders and 4 x grenade launcher operators)

https://vanguardminiatures.co.uk/shop/renegade-militia-infantry/

 

Renegade Militia – Specialists 1

Set contains:

 

4 x officers

 

2 x discipling masters

 

2 x radio operators

 

2 x standard bearers

 

2 x snipers

 

3 x light mortars with 2 crew each

 

3 x light quad mortars with 2 crew each

 

3 x twin heavy MG teams

 

3 x auto-cannon teams

 

3 x tank commander torsos

https://vanguardminiatures.co.uk/shop/renegade-militia-specialists-1/

 

Renegade Militia – Specialists 2

Set contains:

 

15 x discipling masters (in 5 poses)

 

3 squad HMG teams (3 figure teams)

 

6 x light support weapons (3 x flamer, 3 x melta)

https://vanguardminiatures.co.uk/shop/renegade-militia-specialists-2/

[Naryn]

Love those tiny Sentinels! On an unrelated note just got my shipment of Helian and Gothic ships and I've gotta say they were a joy to put together. Thanks for all you do!

[malika666]

Some new releases!

 

First up...BLAST MARKERS!

 

Blast Markers (Large)

Set contains:

 

5 x large blast markers (3D printed)

 

8mm tall figure show for size purposes only.

https://vanguardminiatures.co.uk/shop/blast-markers-large/

 

Blast Markers (Small)

Set contains:

 

6 x small blast markers (3D printed)

 

8mm tall figure show for size purposes only.

https://vanguardminiatures.co.uk/shop/blast-markers-small/

 

And the first STL files available through Vanguard Miniatures!

 

Blast Markers – Download

Both large and small blast markers, supported versions included.

https://vanguardminiatures.co.uk/shop/blast-markers-download/

 

And some fleetscale bits!

 

Novan Fleet – Cruiser Prows

Three Novan fleet cruiser prows

 

1 x torpedo tubes (closed)

 

1 x ram (can also mount a cannon)

 

1 x prow cannon (can also mount a ram)

https://vanguardminiatures.co.uk/shop/novan-fleet-cruiser-prows/

 

Cybershadow Fleet- Destroyer Prows

2 x Cybershadow Destroyer prows.

 

Resin cast model

https://vanguardminiatures.co.uk/shop/cybershadow-fleet-destroyer-prows/

[Naryn]

Love those cruiser prows. The blast markers could be pretty sweet for Battlefleet Gothic as well. Looks like I have another order coming soon!

[malika666]

More STLs available:

 

Dock Crane – (STL Download)

Both supported and unsupported files included.

https://vanguardminiatures.co.uk/shop/dock-crane-stl-download/

 

Airbase Accessories – (STL Download)

Both supported and unsupported files included.

 

Includes:

 

Control tower

 

Radar tower

 

2 x Gas tanks

https://vanguardminiatures.co.uk/shop/airbase-accessories-stl-download/

 

Port Accessories – (STL Download)

Both supported and unsupported files included.

 

Set contains:

 

Dump bins empty in 2 variants

 

Dump bins full in 2 variants

 

1 x fuel bowser

 

1 x small generator

 

1 x large generator

 

Laser fence pylons in 2 variant (short and tall)

 

1 x modular socket emplacement

https://vanguardminiatures.co.uk/shop/port-accessories-stl-download/

 

Bridge Span Set – (STL Download)

This model has been designed to be able to use Troublemaker Games straight road plastic tiles, but you can use any material you like to create roads for this bridge model.

 

Set contents:

 

1 x bridge span

 

1 x bridge support

 

2 x street light variants

 

1 x safety bollard

 

1 x public comms console

 

All files unsupported.

https://vanguardminiatures.co.uk/shop/bridge-span-set-stl-download/

[malika666]

A little announcement!

 

The STLs of Bits Blitz Designs stuff are now also available through Vanguard Miniatures. For now you can only buy the STLs there, but soon you can also buy printed versions of my designs through them. You can find the current catalog over HERE!

 

Note that Bits Blitz Designs' shop on Cults3D also stays open.

[malika666]

New plastic terrain kits by Troublemaker Games have just become available!

 

Airfield Set

Set contains:

 

4 x airfield sprues

 

Notes:

 

1) Sprue images shows both sides

2) Games Workshop model show for size purposes only and without permission

https://vanguardminiatures.co.uk/shop/airfield-set/

 

Siegeworks Set

Set contains:

 

4 x siegeworks sprues

 

Notes:

 

1) Sprue image shows both sides.

2) Figures shown for size purposes only.

https://vanguardminiatures.co.uk/shop/siegeworks-set/

[malika666]

More Bits Blitz Designs items are now available as STL's on Vanguard Miniatures!

 

 

Available here: https://vanguardminiatures.co.uk/product-category/3d-printable-stl-files/bits-blitz-designs-stls/

[malika666]

New tanks out!

Novan Elites – Trojan II APC

 

Set contains:

3 x Trojan II hulls (resin cast)

9 x rear hull hatches (resin cast) (3 of each Novan Great House symbols – reverse sides plain)

5 x forward hatches sprues (metal cast) (5 variants)

Notes:

1) These models can mount turrets such as the Hailstorm and IFV turret variants from the metal cast model range.
2) The Novan Great House symbols provided are for, The Duchy of Crescente, The Fero 3) Ascendancy and The Triumvirate of Aquilae.

https://vanguardminiatures.co.uk/shop/novan-elites-trojan-ii-apc/

Renegade Novan Elites – Trojan II APC

 

Set contains:

3 x Renegade Trojan II hulls (resin cast)

9 x rear hull hatches (resin cast) (3 variants – reverse sides plain)

5 x forward hatches sprues (metal cast) (5 variants)

Notes:

These models can mount turrets such as the Hailstorm and IFV turret variants from the metal cast model range.

https://vanguardminiatures.co.uk/shop/renegade-novan-elites-trojan-ii-apc/

[malika666]

A whole bunch of new releases!

First up:

Novan Regulars – Corsair Pattern Light Battle Strider

 

The Corsair light battle strider was amongst the first of a new generation of battle walkers to come from the armouries of the Great Houses of the Novan Commonwealth.

Set contains:

3 x Corsair light battle striders

Two hull weapon types included.

Two arm weapon loadouts included.

Notes:

1) Three leg poses
2) Two sensor head designs
3) Optional open cockpit torso with pilot figure
4) Model height approximately 26mms not including shoulder weapon
5) Plastic bases not included.

https://vanguardminiatures.co.uk/shop/novan-regular-corsair-pattern-light-battle-strider/

Another tank for the Novan Regulars!

Novan Regulars – Dragon II Flame Tank

 

Set contains:

3 x Dragon tank hulls

6 x fuel tanks (2 variants)

6 x turrets (2 variants)

3 x bow MG’s

https://vanguardminiatures.co.uk/shop/novan-regulars-dragon-ii-flame-tank/

A new tank for the Skinners!

Skinners – Tanks With Energy Cannon Turrets

 

Set contains:

4 x Skinners tank hulls (4 variants)

4 x energy cannon turrets (4 variants)

https://vanguardminiatures.co.uk/shop/skinners-tanks-with-energy-cannon-turrets/

Who needs some extra turrets?

Novan Elites -Guardian Turrets

 

Set contains:

4 x Guardian turrets

https://vanguardminiatures.co.uk/shop/novan-elites-guardian-turrets/

Novan Elites -Trojan IFV Turrets

 

Set contains:

2 x twin HMG turrets

2 x twin laser cannon turrets

https://vanguardminiatures.co.uk/shop/novan-elites-trojan-ifv-turrets/

Skinners – Tank Turrets (cannon)

 

Set contains:

8 x Skinners cannon turrets

https://vanguardminiatures.co.uk/shop/skinners-tank-turrets-cannon/

Skinners – Tank Turrets (energy cannon)

 

Set contains:

8 x Skinners energy cannon turrets

https://vanguardminiatures.co.uk/shop/skinners-tank-turrets-energy-cannon/

And the 3mm Novan Regulars shouldn't be forgotten either!

3mm Novan Regulars – Dragon Platoons

 

Set contains:

6 x dragon hulls (Warrior 1 based hull)

6 x dragon turrets

https://vanguardminiatures.co.uk/shop/3mm-novan-regulars-dragon/

[malika666]

Another one of the Bits Blitz Designs line has been released!

BU-11 Bull Class Civilian Shuttle (STL Download)

 

The BU-11 class civilian shuttle, also known as the ‘Bull’, is designed for smallscale (6mm / 8mm) gaming, making it compatible for games such as Adeptus Titanicus, Battletech, Aeronautica Imperialis, X-Wing and others.

The kit contains the following parts:
– 3x hulls (landing gears out, landing gears in, no landing gears at all)
– cockpit
– front hatch
– engine*
– separate landing gears**
– 2x crew members

Please do not share of sell these files without my written permission!

*Note that you’ll have to print the engine 4 times.

**Note that you’ll have to print each of the landing gear parts 2 times if you’re planning on using them on the hull without the landing gears.

https://vanguardminiatures.co.uk/shop/bu-11-bull-class-civilian-shuttle-stl-download/