Jump to content

Advanced Armory Annex


LaLongCarabine

Recommended Posts

So I forgot that B&C had xenos sections so now that I've come back I've decided to share my work with you folks.

 

I figure I'll start with the already printed prototypes, then finished designs ready to hit the shapeways store, and lastly a neat piece of work.

 

1. Rotary cannon

2. Mag rifle

3. Particle accelerator cannon and micro missiles

4. Conformal VLRS missile pods

5. Large Railgun

6-7. Ion Repeaters

8. Ion Repeater mounted on arm

9.Fusion Cutter

10. Shoulder armor

 

tumblr_pidjwpn6yw1u4coygo1_1280.jpg

tumblr_pidjwpn6yw1u4coygo3_1280.jpg

tumblr_pidjsa1Ili1u4coygo6_r1_1280.jpg

tumblr_pidjsa1Ili1u4coygo1_1280.jpg

tumblr_pidjsa1Ili1u4coygo4_1280.jpg

tumblr_pij5ezuQrg1u4coygo3_r1_640.png

tumblr_pij5ezuQrg1u4coygo4_r1_500.png

tumblr_pij5ezuQrg1u4coygo2_1280.png

tumblr_pimwy49YNW1u4coygo10_r1_1280.png

tumblr_piq6nfMLgQ1u4coygo1_500.png

 

 

Lastly my current inpro work

 

tumblr_piw3iaDcwp1u4coygo1_1280.png

 

Fully compatible with existing XV8 models, just needs some more detail, some edge rounding, and a head.

 

Rotary cannon, mag rifle, ion repeaters, poseable arms, conformal missiles, micro missiles, fusion cutter, engine manifolds, and shoulder armor should be on shapeways by the end of the week. I'll post up the store link when the bits are ready.

 

Link to comment
Share on other sites

If Crisis just could take Rail weaponry ... it would be a dream come true. :D

 

I like your Burst cannons tho would've prefered them with 4 barrels each like the GW ones I think. Just something about having 4 shots and 4 barrels to represent it even tho that's not how rotary cannons work. :P

 

I'm looking forward to your Cyclic Ion Blasters. If the price is right I think I'll be ordering some.

 

Also a question: are the weapon bitz separate or do they always come with arms? Crisis Suits are so easy to magnetize, I really don't need the arms lol

Link to comment
Share on other sites

If Crisis just could take Rail weaponry ... it would be a dream come true. :biggrin.:

 

I like your Burst cannons tho would've prefered them with 4 barrels each like the GW ones I think. Just something about having 4 shots and 4 barrels to represent it even tho that's not how rotary cannons work. :tongue.:

 

I'm looking forward to your Cyclic Ion Blasters. If the price is right I think I'll be ordering some.

 

Also a question: are the weapon bitz separate or do they always come with arms? Crisis Suits are so easy to magnetize, I really don't need the arms lol

Arms will be one bundle with a pair, weapons will be sold single, double, and sets of 4.

 

I can dig preferring 4 barrels, I just wanted to do something different. You wanna commission me I can design you up a specific configuration.

Link to comment
Share on other sites

Nah I really just care about a properly priced source for Cyclic Ion Blasters. GWs Burst cannons aren't my favourite rotary cannon design but it's not bad enough for me to comission new ones. :P

Link to comment
Share on other sites

Ion Weapons, Fusion Weapons, Particle Accelerator Cannons, Arms, Missiles, and Manifold Covers are now available on Shapeways! I'm working on changing over to private casting but it might take a bit, shapeways charges like 8 bucks for a bit I'd charge 4 for.

Also finally was able to work with the new bits for pics of how well they go together.

tumblr_pizk72VhXf1u4coygo4_1280.jpg
tumblr_pizk72VhXf1u4coygo1_1280.jpg
tumblr_pizk72VhXf1u4coygo6_1280.jpg
tumblr_pizk72VhXf1u4coygo2_1280.jpg
tumblr_pizk72VhXf1u4coygo3_1280.jpg
tumblr_pizk72VhXf1u4coygo5_1280.jpg

And finally the last progress shot of the Urban Combat chassis.
tumblr_pizk72VhXf1u4coygo7_1280.png

I've been told that the angular shoulder pads look better on the heavier suit with extra armor while the smaller rounded shoulder pads made for great ways to pick out a commander or team leader.

Link to comment
Share on other sites

Ion Weapons, Fusion Weapons, Particle Accelerator Cannons, Arms, Missiles, and Manifold Covers are now available on Shapeways! I'm working on changing over to private casting but it might take a bit, shapeways charges like 8 bucks for a bit I'd charge 4 for.

 

Also finally was able to work with the new bits for pics of how well they go together.

 

Just to get it right, so that's $8 for a single weapon bitz? If that's the case then that's a hard pass from me since there are similar offers on shapeways where I can get 4 weapon bitz for ~$12 already.

$4 per bit would be much more manageable, but considering the quantity of weapon bitz one needs for Crisis Suits it would still be a big difference (a 3 suit unit with max CIB would be 9 bitz which I would get for ~$22 from that one shop and would still cost $36 if you'd sell yours for $4 a piece.

Link to comment
Share on other sites

 

 

Ion Weapons, Fusion Weapons, Particle Accelerator Cannons, Arms, Missiles, and Manifold Covers are now available on Shapeways! I'm working on changing over to private casting but it might take a bit, shapeways charges like 8 bucks for a bit I'd charge 4 for.

 

Also finally was able to work with the new bits for pics of how well they go together.

Just to get it right, so that's $8 for a single weapon bitz? If that's the case then that's a hard pass from me since there are similar offers on shapeways where I can get 4 weapon bitz for ~$12 already.

$4 per bit would be much more manageable, but considering the quantity of weapon bitz one needs for Crisis Suits it would still be a big difference (a 3 suit unit with max CIB would be 9 bitz which I would get for ~$22 from that one shop and would still cost $36 if you'd sell yours for $4 a piece.

Considering that they're putting costs at $7.50 per bit bare in high detail resin I'd love to know how someone else is managing $3 per item? (No sarcasm). My rates are exactly what shapeways gives me for bare min +$0.50.
Link to comment
Share on other sites

Probably because they sell them in sets rather than separately. You rarely need just one or two weapon bitz for Crisis Suits considering how many hardpoints you got in each unit. ;)
Link to comment
Share on other sites

Probably because they sell them in sets rather than separately. You rarely need just one or two weapon bitz for Crisis Suits considering how many hardpoints you got in each unit. :wink:

I actually did upload several set versions but they ended up pricing out at exact multiples of the single items. They're not showing on the front page for some reason (waiting on shapeways support to verify them or somesuch nonsense)

Link to comment
Share on other sites

 

Probably because they sell them in sets rather than separately. You rarely need just one or two weapon bitz for Crisis Suits considering how many hardpoints you got in each unit. :wink:

I actually did upload several set versions but they ended up pricing out at exact multiples of the single items. They're not showing on the front page for some reason (waiting on shapeways support to verify them or somesuch nonsense)

 

 

Well then I don't know.

Also funny I just arrived at work and here your stuff shows me as $9.53 and the other guys set of 4 as $13.79. I'm not that experienced when it comes to Shapeways so I can't really say why things are like that.

If it helps I can link the other guys Shapeways profile so you can check it yourself? If not for obvious reasons then I of course won't. It's your products thread after all. ^^

Link to comment
Share on other sites

 

 

Probably because they sell them in sets rather than separately. You rarely need just one or two weapon bitz for Crisis Suits considering how many hardpoints you got in each unit. :wink:

I actually did upload several set versions but they ended up pricing out at exact multiples of the single items. They're not showing on the front page for some reason (waiting on shapeways support to verify them or somesuch nonsense)

 

 

Well then I don't know.

Also funny I just arrived at work and here your stuff shows me as $9.53 and the other guys set of 4 as $13.79. I'm not that experienced when it comes to Shapeways so I can't really say why things are like that.

If it helps I can link the other guys Shapeways profile so you can check it yourself? If not for obvious reasons then I of course won't. It's your products thread after all. ^^

 

I've found a few sellers showing lower prices, I'm not one to try and shill my stuff at these prices. As it stands my stuff is up so people can grab if they choose to, I plan on messaging shapeways and asking about price discrepancy. Similar sized items (right down to volume) are much lower and that makes no sense. 

 

Hopefully in a few weeks/months I can start casting buckets of this stuff and sell for 3-4 bucks a pop plus shipping.

 

Also if anyone really wants any of these parts they can contact me I can look into working with my contract printer and do bespoke orders rather than cast ones.

Link to comment
Share on other sites

 

 

 

Probably because they sell them in sets rather than separately. You rarely need just one or two weapon bitz for Crisis Suits considering how many hardpoints you got in each unit. :wink:

I actually did upload several set versions but they ended up pricing out at exact multiples of the single items. They're not showing on the front page for some reason (waiting on shapeways support to verify them or somesuch nonsense)

 

 

Well then I don't know.

Also funny I just arrived at work and here your stuff shows me as $9.53 and the other guys set of 4 as $13.79. I'm not that experienced when it comes to Shapeways so I can't really say why things are like that.

If it helps I can link the other guys Shapeways profile so you can check it yourself? If not for obvious reasons then I of course won't. It's your products thread after all. ^^

 

I've found a few sellers showing lower prices, I'm not one to try and shill my stuff at these prices. As it stands my stuff is up so people can grab if they choose to, I plan on messaging shapeways and asking about price discrepancy. Similar sized items (right down to volume) are much lower and that makes no sense. 

 

Hopefully in a few weeks/months I can start casting buckets of this stuff and sell for 3-4 bucks a pop plus shipping.

 

Also if anyone really wants any of these parts they can contact me I can look into working with my contract printer and do bespoke orders rather than cast ones.

 

 

Shapeways changed thier pricing policy a few months ago. It's more expensive for new items, the old ones are grandfathered in.

Link to comment
Share on other sites

  • 5 weeks later...

If Crisis just could take Rail weaponry ... it would be a dream come true. :D

 

I like your Burst cannons tho would've prefered them with 4 barrels each like the GW ones I think. Just something about having 4 shots and 4 barrels to represent it even tho that's not how rotary cannons work. :P

 

I'm looking forward to your Cyclic Ion Blasters. If the price is right I think I'll be ordering some.

 

Also a question: are the weapon bitz separate or do they always come with arms? Crisis Suits are so easy to magnetize, I really don't need the arms lol

If plasma rifles were just replaced with railrifles we would have 30" rapid fire 1 guns that could potentially do more damage (d3).

Link to comment
Share on other sites

  • 3 weeks later...

hmm.

 

Ever thought of Doing a "simple Gue'vessa" conversion for the suits?

 

A new leg from the Knee joint down and a new foot that "shows" its a human.

 

I've been considering how to do that for a different reason.  I haven't really haven't been able to compare some of my initial thoughts, such as Terminator or Centurion feet.

Link to comment
Share on other sites

 

hmm.

 

Ever thought of Doing a "simple Gue'vessa" conversion for the suits?

 

A new leg from the Knee joint down and a new foot that "shows" its a human.

 

I've been considering how to do that for a different reason.  I haven't really haven't been able to compare some of my initial thoughts, such as Terminator or Centurion feet.

 

I would say to look at the Dreadknight foot/shin. then find a good blend of the centurion and that

Link to comment
Share on other sites

 

 

hmm.

 

Ever thought of Doing a "simple Gue'vessa" conversion for the suits?

 

A new leg from the Knee joint down and a new foot that "shows" its a human.

 

I've been considering how to do that for a different reason.  I haven't really haven't been able to compare some of my initial thoughts, such as Terminator or Centurion feet.

 

I would say to look at the Dreadknight foot/shin. then find a good blend of the centurion and that

 

Reasonable ideas, I may or may not do this as I am planning on doing my own legs (already have torso, head, arms and weapons done so why not).

 

I'll stick it in queue for later work. However right now I'm kinda wrapped up in viking work.

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.