Jump to content

Hiro's 6x4 Table Scenery Tiles Project


Hiroitchi

Recommended Posts

So its the begining of a new year especially for me and I find myself at a great position to make purchases I wasn't able to before. For years I have always eyeballed the Forge World Tiles. A few weeks ago I received an awesome birthday gift in the form of one of those tiles. Nearly done at the time of this writing, I decided to make a year long project for a 6x4 Table worth of some of these tiles. I want to make them uniformed, but at the same time use some of those tiles as a display board for my armies and as static Kill Team Boards. Here are the pics I got from various sites as I await for them to arrive vial mail. Then I'll post the picture and WIP of the Imperial strongpoint that I have been working on the past couple of weeks. But throughout this thread I'll share my work for the Terrain pieces for this table. Enjoy.

Tiles

gallery_61925_16108_23147.jpg

Forge World Imperial Strong Point.

gallery_61925_16108_70357.jpg

Imperial Primus Redoubt

gallery_61925_16108_50092.jpg

Citadel Realm of Battle Board (Skulls)

gallery_61925_16108_28085.jpg

Citadel Realm of Battle Board (Cobblestone)

gallery_61925_16108_12066.jpg

Crashed Thunderhawk Gunship

gallery_61925_16108_60409.jpg

Castellum Stronghold

WIP Imperial Strong Point

gallery_61925_15403_23051.jpg

Started working on using "Dawn" dish soap to start scrubbing the surface of the tile to make sure any of the mold release residue is off.

gallery_61925_15403_15532.jpg

Soaked and scrubbed some more because well I dont trust myself that I got all the residue off,

gallery_61925_15403_23429.jpg

After waiting for the tile to dry, I have the tile a nice coat of black primer. The I started layering the dark greys to near white paint using rattle cans and the dry brushing. I painted it this way so that should the snow flock that may come off through use will still look like snow. Hope this helps the snow effect.

gallery_61925_15403_64631.jpg

Then I started to pick out the details. Since this is one big piece I went at it one color at a time and started working on the OSL feel. Still a lot to learn.

gallery_61925_15403_90128.jpg

I then started to pick out more of the details and placed the first layer of flock using Woodland Scenic Snow and Glue. I even went ahead and added some mud effects and more OSL attempts. So far so good.

gallery_61925_15403_900916.jpg

I felt the snow needed some tuff and another layer of it to thicken the snow. As I stared longer at the muddy area, I thought it would be cool to add a coolant leak effect. I went ahead and printed out some posters using a 50/50 mix of PVA and water to glue them into place. I tried more of a hand into NNM effect on the Aquillas.

Hope you guys like em so far. C & C is always welcome. Thank you

Edited by Hiroitchi
Link to comment
Share on other sites

This Arrived in the Mail today and well I couldn't wait to get started.

gallery_61925_16108_33518.jpg

I shook the box slightly just incase parts were broke and this rattles. I was trying to mentally prepare for this

gallery_61925_16108_5558.jpg

Took the top layer of packaging out and found the resin parts of the Turbo Laser. Not too shabby on the packing there.

gallery_61925_16108_89117.jpg

Set the Box aside and pulled out the tile. Everything seems in order and well the resin parts seem to be all there so I can't complain.

gallery_61925_16108_25244.jpg

Now time for a bath. Soaked the tile in warm water and dishwasher soap to try and remove any excess mold remover off the tile. I have a scrub sponge ready to start scrubbing.

So far so good and will make more updates soon. Thanks for reading.

Link to comment
Share on other sites

Progress looks good so far!

 

Curious about the dark, purple-black resin though. I'm assuming that's what Forge World used for their tiles (never bought any terrain off of them so I have no idea what to expect)?

Link to comment
Share on other sites

It’s a weird type of hardened plastic. Still a pain in the butt to prep since it’s pretty big and cumbersome. However it’s pretty rewarding to complete. I’ll be posting more pictures soon as soon as I can. Thanks for reading.
Link to comment
Share on other sites

Link to comment
Share on other sites

I'm amazed by the quality and speed of your progress here. The paint and weathering looks great and the snow is really well executed. Looks like an amazing setting for a game

Great work so far, looking forward to seeing more of it completed!!

Looking good! I too have been tempted by the FW boards.

Did you have to treat them to get them to lie flat? I'd heard that some boards arrive warped.

I can lay them flat and I have not notice any issues with this bank

Thanks again for the words of encouragement. so basically I have a 4x4 table ready to go but I feel like one of those late night infomercials where they say, "but wait there is more." The Strong Point and the Redoubt are done. The refinery is still on the fence about adding more depth and layers. Anyways here are some of my rest updates:

gallery_61925_16108_98611.jpg

Ice effect is complete for this tile. Now to add more detail to the pipes; well maybe. That is why I haven't added any snow on those conduits.

gallery_61925_16108_125053.jpg

here is a different angle. So far so good.

gallery_61925_16108_109503.jpg

Still trying to decide with this tile.

gallery_61925_16108_143065.jpg

This is basically the 4x4 table I've worked one and more to come in the future.

Edited by Hiroitchi
Link to comment
Share on other sites

This reminds me so much of the bunker on Hoth is Star Wars!

That was part of my inspiration for this project. Now I'm dressing up the empty tile.

gallery_61925_16108_34134.jpg

So With this tile. I decided to add the ice effect much like I did with the other Citadel Realm of Battle Board. This time I decided to add some plant life. Pretty happy with the results so far. I initially painted the trees that I got from the Deathwatch Kill Team starter box and tried to imagine plant life that can survive harsh winter environments. Waiting for this to dry and then I'm going to touch up the roots with some Warhammer technical snow.

Thanks for continually checking this project out. By the way tile no. 5 will be making an apperances soon. Tiles one and two are practically done, but I might touch up for more detail. I was told I shouldn't work on the tiles in more than what I already have because it might detract from the models being played on it. I dunno; the fence is still on that one.

Link to comment
Share on other sites

So more of the Empty Tile aka the stone slab tile has been worked on this even due to finding some time to add dragon's teeth to this tile.

gallery_61925_16108_86476.jpg

These FW Sprues came attached with my twin heavy bolter Razorback turret. After looking at it and at the Imperial Strong point; I realized here these work great as Dragoon's teeth. Makes me regret throwing out the long pieces that can be used as Jersey Barriers. So the next pictures is the dragon's teeth waiting to dry after being glued and flocked.

gallery_61925_16108_977806.jpg

Link to comment
Share on other sites

So back to the Refinery now that the Necromunda Stairs and Platforms box has arrived. Pretty stoked and excited on what I can pull off here for the refinery tile.

So I did sometest fittings and tried to figure out how it all fits and this is what I have come up with after priming it. I even did a test on how snow would look on the stairs.

gallery_61925_16108_45579.jpg

I Drybrushed the metal with some Necron Compund on the Chaos Black Primer. Then after being satisfied with the results and placement, I glued everything down. Once dry I started adding the sprak of Woodland Scenic cement and sprinkled on the snow.

gallery_61925_16108_49961.jpg

So far the results have been beyond satisfactory. Once this is dry I'm going to make a few mounds here and there using GW technical snow. I going to add this detail on the ladders as well. Hope you guys are enjoying the process.

Link to comment
Share on other sites

Looking good!

Thank you.

I've been slow on the updates, but so far I got my 5th tile in last week and I thought I'd share these. Its almost done.

gallery_61925_16108_10233.jpg

Tables 1-5 work in progress. I'm pretty happy with the ongoing results thus far. As for the 5th tile yes that is a Forgeworld crashed Thunderhawk. My wife looked annoyed that I was taking pictures rather than doing the dishes I said I would do.

gallery_61925_16108_55817.jpg

I had already primed and layed the base color of the crashed Thunderhawk tile.

gallery_61925_16108_24202.jpg

I use Mechanicus grey primer this time around since tbh I was running out of Chaos Black. I then coated and dusted area using Citadel Wraithbrone spray and tamyia white. As for the dark and black areas, I had used Tamyia Gloss Black spray and whatever left over of my Chaos black spray.

gallery_61925_16108_165425.jpg

Here is a close up of the base colors I will be working on.

gallery_61925_16108_164715.jpg

Left Rear of the Thunderhawk.

gallery_61925_16108_176031.jpg

Right Rear of the thunderhawk

gallery_61925_16108_133925.jpg

I then started laying out the base blue using Macragge Blue for the Ice winter theme I have been doing with my project theme.

gallery_61925_16108_215310.jpg

Using drybrushing I started to bring out the details through dry brushing in this order Hoeth Blue, Calgar Blue, Fenrisian Grey, Space wolf Grey, and finally white scar.

gallery_61925_16108_162755.jpg

Using the same colors I had used, I started to work on the canopy. I was careful to line the cracks of the glass with Space Wolves Grey After the colors were layed down I then put a thin layer of Glossy Nuln oil to the glass. Then I painted the glass light refraction look with white scar.

gallery_61925_16108_94348.jpg

I applied decals using Micro Sol. Once dry I used the sponge weathering techniques using Administrum grey and Castellen Green to break up the white decals a bit. As for other weathering techniques used I like using the Tamiya weathering master pigments.

gallery_61925_16108_36832.jpg

Finally I flocked the snow on there. This time I used a brush to get the Scenic Cement where I wanted. I used then used the spray bottle once the first layer was set in to apply a thin layer over of snow over it. Lastly I then applied isopropyl alcohol to heal seal it. will wait on the pigments of rust before apply matte varnish.

That's it for now and thanks for looking.

Link to comment
Share on other sites

So I finished the Crashed Thunderhawk Tile. I hope you can enjoy the view.

gallery_61925_16108_73705.jpg

Front

gallery_61925_16108_96197.jpg

Right

gallery_61925_16108_71504.jpg

Rear

gallery_61925_16108_31467.jpg

Left

gallery_61925_16108_83068.jpg

Then I added these fire smoke effects using teddy bear stuffing, a rattle can of black, and dollar store tea lights.

gallery_61925_16108_34613.jpg

I hope you guys enjoyed this post as much as me putting my 5th tile. Now time to work on the 6th. Still cant decided to go Castellen Strong hold or make one 2x2 tile entirely.

gallery_61925_16108_405547.jpg

Link to comment
Share on other sites

Wowza. This looks great! You've chosen some excellent tiles for your table. The crashed Thunderhawk and bunker entrance are two of my favourites. Can't wait to see what to do with those ZM tiles.

 

How have you liked working with the woodland scenics snow/products in general? I have a table I plan to build soon and am thinking of using their products.

Link to comment
Share on other sites

Thanks! I greatly appreciate it guys. I’ve been working on the next two tiles and well it’s been a busy time for me. More to follow guys. I just picked up parts to build up the refinery and the Castellen Stronghold is on it’s way.
Link to comment
Share on other sites

  • 3 weeks later...

Its been two weeks since my last post and well I have been really busy with IRL and even finishing up projects here and there. So here is what I have been up to terrain wise; I have been busy building up my Refinery tile using necromunda uprising pieces. They look and work great. Here's the progress so far on that front. I glued the Uprising tiles to a 2x2 3mm wooden board that I got from my local Lowes. Not to shabby on the price. It was a 2x4 piece that I had them cut in half, but it was a rough measurement. I later used a hand saw to trim a 1mm-2mm lip using an Army Painter Saw, still have to sand it down to make it smooth and safe. I just hope that it wouldn't warp later when I started laying some paint on the sides. Then I started work on something Forge World, I think this will be the last tile I buy for awhile. Enjoy the slew of work in Progress pics.

gallery_61925_16108_29968.jpg

the pipes section, I did make some further modifications and adjustments later on, you'll see.

gallery_61925_16108_21279.jpg

inside the refinery installation. I started kind of trying to draw inspiration from the alien movies. In fact that gives me an idea.

gallery_61925_16108_153149.jpg

This is the entry way and reverse bifurcated stair case to link the 2nd floor to the third floor. I keep the pieces unglues to the base till I finish painting them.

gallery_61925_16108_149394.jpg

Here is what the refinery tile looks like when tied with the first refinery tile I made. its crazy to see it come together like this.

gallery_61925_16108_57024.jpg

Then this beast showed up so I halted work on the refinery tile. I ended up started my usual give this a bath look after opening it.

gallery_61925_16108_102266.jpg

After a three our bath. I primed this block of Forge World Resin Chaos Black Primer, then built up the highlights from mechanicum grey, wraithbone, and white. I used coats of Matt satin varnish in between each color.

gallery_61925_16108_114301.jpg

Then I test fitted the turrets after laying some metal colors down with nuln oil. I ran out. lol

gallery_61925_16108_14752.jpg

Then used a stencil to use a rattle can to paint the roman numeral 2 on the landing pad portion of the stronghold.

gallery_61925_16108_165302.jpg

worked on some extra details on the piece and even painted the windows. Still need some practice but its getting there. I started using Raptors Iconography.

gallery_61925_16108_146889.jpg

Decals have been put in place and more varnish sprayed on. I was curious on how it looks with a large piece model and how it can come together. So I pout my kit bashed Storm Raven on there and needless to say it did not disappoint.

gallery_61925_16108_1385637.jpg

I started work back on my Refinery tile while I wait for the piles of snow effect I made using Valhalla Blizzard. I ran out half way and made more using Woodland Scenics Snow and Elmers glue. The results ended up being eerily similar.

gallery_61925_16108_4077.jpg

I'll post more later since I did ended up finishing my 6x4 project and now just working on the an alternate tile.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.